Advertisement
Quick Links
Advertisement
Related Manuals for jbc T210
Summary of Contents for jbc T210
- Page 1 INSTRUCTION MANUAL Soldering Iron Handles Ref. T210 / T245 / T470...
- Page 2 Features For C245 Cartridge range The soldering iron handles for general purposes are suitable for both SMD components and jobs with high power requirements (e.g. ground plane soldering). General Purpose Handle Ref. T245-A Soft foam (Ref. 0016057) Blue grip to easily distinguish it from other handles Blue Handle Ref.
- Page 3 For C210 Cartridge range The T210 handles are suitable for precision soldering jobs with medium power requirements. Due to their size, they work with conventional and small SMDs as well as under a microscope. Precision Purpose Handle Ref.
- Page 4 These are for working in an oxygen-free atmosphere providing better quality soldering. They offer extra heat to the solder joint and help prevent oxidation. The JBC GN-A Nitrogen Generator Module or an external nitrogen feed is needed at the operator’s bench.
- Page 5 Changing T210 & T245 Cartridges Save time and change cartridges safely without switching the station off. 1. Removing 2. Inserting 3. Fixing Place the Cartridge in the Place the handle on top Use the holes to fix the...
- Page 6 Changing T470 Cartridges 1. Removing 2. Inserting Loosen Insert the new cartridge* and press slightly Loosen the screw. Place the Soldering Iron in as far as the mark and tighten the screw. the extractor and remove the cartridge. Changing Nitrogen Cartridges Before changing the cartridge After changing the cartridge Nozzle...
-
Page 7: Maintenance
Use a damp cloth or alcohol. - Periodically check all cables and tubes connections. - Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only be performed by a JBC authorized technical service. -
Page 8: Replacing Seals
Never use a cartridge to do this operation. Accessories Fume extractor Cable collector Ref. F3435 (for T245 / T470) Ref. CC1001 Ref. F3450 (for T210) Keeps the work area free of cable. Clips can be easily removed for quick maintenance. - Page 9 Compatibility Cartridge Handle Stand Range T210-A C210 T210-PA T245-A AD-SE T245-PA C245 T245-B T245-GA C245 AD-SE T470-A C470 HD-SE C245 AD-SE T470-B C470 HD-SE C245 AD-SE T470-SA C470 HD-SE C245 AD-SE T470-ZA C470 HD-SE C245 AD-SE T470-FA...
- Page 10 Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cable must be plugged into approved bases. Make sure that it is properly grounded before use.
- Page 11 w w w.jbctools.com Notes...
- Page 12 Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.