Precision Heater hose set .....1 unit USB-B connector Ref. JTE-1D (120V) Ref. TE-TB Update the station JTE-2D (230V) software from JTE-9D (100V) the JBC website Activates the suction pump Precision Heater Hose set Ref. TE-TB Stand ............1 unit Nozzles ............3 units Suction Tube Ref.
Page 3
w w w.jbctools.com Adjustable Stand Quick Nozzle Changer Adjust the tool holder angle to suit your work position. Changing nozzles quickly and safely. Turn the tool off and handle with care. The heating element and the nozzle are still hot. Operation Modes Compatible Nozzles 1.
Page 4
w w w.jbctools.com Operation 1. Placing 2. Heating 3. Releasing Program Mode P r o g r a m 8 Selected program º º T e m p Current temperature Graph of selected Selected flow program 100% Time 125s. Remaining time Increase program Decrease program Position the extractor with the...
Page 5
w w w.jbctools.com Replacing the Heating Element Menu Screen Original PIN: 0105 Only perform this operation when the element is cold and the unit is disconnected from the mains. 1. Loosen the screw. M a i n m e n u 2.
Page 6
w w w.jbctools.com Hot Air Accessories Pick & Place (not supplied with TE-Q) This tool helps you easily place and remove SMDs of any size thanks to the suction system. Find the model that best suits your soldering needs in www.jbctools.com Protector Tripod Extractor...
Page 7
- Replace any defective or damaged pieces. Use original JBC spare parts only. adequate supervision or instruction concerning use of the appliance and understand the hazards involved.
Page 8
w w w.jbctools.com Specifications Exploded View TE-1QD 120V 50/60Hz. Input fuse 8A. Rated Current 6A. Control Unit model: JTE-1D TE-2QD 230V 50/60Hz. Input fuse 4A. Rated Current 3A. Control Unit model: JTE-2D TE-9QD 100V 50/60Hz. Input fuse 8A. Rated Current 7A. Control Unit model: JTE-9D - Weight: 5.4 kg (11.9 lb) - Dimensions: 148 x 184 x 140 - Nominal Power: 300W...
Page 9
Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.