Horizon Fitness 7.0AT Owner's Manual page 13

ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART TYPE
E HEX SOCKET BOLT
F FLAT WASHER
G SPRING WASHER
H ARC WASHER
5
G F
E
H
4
DESCRIPTION QTY
M8X1.25PX15L 6
8.4X15.5X1.6T 4
8.2X15.4X2.0T 6
8.2X18.0X1.5T 2
E
G
F
2
3
NOTE: Do not fully tighten bolts until STEP 3.
A Open HARDWARE FOR STEP 2.
B Gently place the CONSOLE (5) on top of the CONSOLE
MASTS (3&4). Attach the LEFT SIDE first using 3
BOLTS (E), 3 SPRING WASHERS (G), 2 FLAT WASHERS
(F) and 1 ARC WASHER (H) on the bottom.
C The CONSOLE CABLE (2) is tucked into the RIGHT
CONSOLE MAST (3). Using the lead wire carefully pull
the CONSOLE CABLE (2) out of the RIGHT CONSOLE
MAST (3). Detach and and discard the LEAD WIRE.
Connect the CONSOLE CABLES (2) and carefully tuck
wires into the right mast to avoid damage.
D Attach the RIGHT SIDE of the CONSOLE (5) using 3
BOLTS (E), 3 SPRING WASHERS (G), 3 FLAT WASHERS
(F) and 1 ARC WASHER (H) on the bottom.
NOTE: Be careful not to pinch any wires
while assembling the console.
G
E
13
F
H