2: Description and features
2.1: Description
FIBARO Walli Controller is a smart wall-mounted Z-Wave™ remote
controller that can activate scenes or control other Z-Wave devices
via associations.
2.2: Main features
•
Can be used for controlling multiple types of devices, e.g. switch-
es, dimmers, roller shutters.
•
Pre-set configurations allow to easily adjust operation for specific
type of controlled devices.
•
Battery or VDC powered.
•
Equipped with a built-in temperature sensor.
•
Supports Z-Wave network Security Modes: S0 with AES-128 en-
cryption and S2 Authenticated with PRNG-based encryption.
•
Works as a Z-Wave signal repeater when VDC powered (all
non-battery operated devices within the network will act as re-
peaters to increase reliability of the network).
•
May be used with all devices certified with the Z-Wave Plus™ cer-
tificate and should be compatible with such devices produced by
other manufacturers.
The device is a Security Enabled Z-Wave Plus product and a
i
Security Enabled Z-Wave Controller must be used in order
to fully utilize the product.
DescrIptIon anD features
5