Advertisement
6. BATTERY REPLACEMENT
If the sign"BAT"appears on the LCD display, it indicates that battery
should be replaced. Remove the battery cover of case. Replace the
exhausted battery with a new one.
WARNING
Before attempting to open the battery cover, be sure that test
leads have been disconnected from measurement circuits to avoid electric
shock hazard.
WARNING
Using this appliance in an environment with a strong radiated
radio-frequency electromagnetic field (approximately 3V/m) may influence
its measuring accuracy.
HYS005448
M266
SERIES
DIGITAL
CLAMP MULTIMETER
OPERATOR'S
INSTRUCTION MANUAL
Advertisement
