Start / Stop - Xylem Ebro EBI 300 Series User Manual

Start / Stop

The logger is started by pushing the start/stop-button for at
least three seconds.
CAUTION! The device can only be started once!
Depending on the set start delay, the device starts to
measure immediately or after a few minutes. It will continue
to measure and store temperature data according to the set
interval, until the data memory is full (up to 6000 values), the
battery empty (lasts for at least 100 days), or the device is
being stopped.
To stop the logger, again push the button for at least three
seconds. Alternatively, remove the protective cap and plug
the device into a USB-slot of your PC, laptop or USB-printer.
The logger will be stopped and the PDF-file generated
automatically.
CAUTION! After the logger is being stopped, it can´t be
restarted!
User manual EBI 330 V 1.1 Page 8 / 16