Appendix C. Using The Release Levers - Epson RP-U420 Series Specification

Confidential

APPENDIX C. USING THE RELEASE LEVERS

1) Using the Release Levers
The release levers on both sides of the printer unit can be used for the following two purposes.
2) Releasing the paper
The release levers on the left and right sides can be used to loosen the paper on the receipt and
journal sides independently. Firmly pressing down on a lever in direction A (see Figure C-1)
releases the paper. When pressure on the lever ceases, the paper holder spring returns the lever
to its normal position.
3) Opening and closing the paper guide
To open the paper guide, first remove the take-up shaft and then pull both release levers
simultaneously in direction B (see Figure C-1). This raises the paper guide and opens it, giving
access to the printing section.
To close the paper guide, carefully push the cover near the levers down with both hands until the
cover clicks shut on both sides. Remember to reinsert the take-up shaft in the take-up frame.
Release lever
EPSON
B
A
Receipt side
Close
Journal side
Figure C-1. Release Levers
TITLE
RP-U420 series
Specification
(STANDARD)
Open
Close
B
Open
SHEET
REVISION
B
Release lever
A
NO.
NEXT SHEET
App.4 App.3