Confidential
APPENDIX D. INSERTING THE VALIDATION PAPER
Inserting the Validation Paper
1) Hold the top of the paper, with the printed side facing toward you.
2) Insert the card straight into the paper slot, with the right side aligned with the paper stopper on the
paper guide.
3) To prevent the paper from being pushed down or bent, hold it during printing.
NOTE: A Validation detector is standard equipment. The detected portion of the validation paper as
shown in Figure 1.10.2 must not include any holes or torn portions.
EPSON
Figure D-1. Validation Paper Insertion
TITLE
RP-U420 series
Specification
(STANDARD)
SHEET
NO.
REVISION
NEXT
B
App.5
SHEET
App.4