Esc ! N - Epson RP-U420 Series Specification

Confidential
CR
[Name] Print and carriage return
[Format] ASCII
Hex
Decimal
[Function] Prints the data in the print buffer and does not feed the paper.
[Description] Sets the print starting position to the beginning of the line.
RS
[Name] Journal tab
[Format] ASCII
Hex
Decimal
[Function] Moves the print starting position to the beginning of the print area for the journal.
[Description] This command is effective when all the following conditions are satisfied simultaneously:
• Both receipt and journal are selected for the print sheet.
• The parallel printing mode for receipt and journal is turned off.
• The print area is set within a printable area on the receipt.

ESC ! n

[Name] Select print mode(s)
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Description] Selects print mode(s) using n as follows:
Bit
0
1
2
3
4
5
6
7
• If the underline is added to the characters to be printed, the lowest bit of the characters
[Note]
overlaps the underline. Therefore, this may cause a difficulty in reading. Give this in
consideration when the underline is added.
[Default] n = 0
EPSON
CR
0D
13
RS
1E
30
ESC ! n
1B 21 n
27 33 n
Off/On Hex Decimal
Off 00 0
Off 00 0
Off 00 0
Off 00 0
Off 00 0
Off 00 0
On 20 32
Off 00 0
Off 00 0
On 80 128
TITLE
RP-U420 series
Specification
(STANDARD)
Function
Reserved.
Reserved.
Reserved.
Reserved.
Reserved.
Double-width mode not selected.
Double-width mode selected.
Reserved.
Underline mode not selected.
Underline mode selected.
SHEET
REVISION
B
NO.
NEXT SHEET
49 48