Mf5 Detector - Minelab MF5 Operation Manual

MF5 Detector

1. Battery Compartment
2. Earset Connector
3. Main Body
4. Controls
5. Shaft Hinge
6. Upper Shaft
7. Upper Camlock
8. Middle Shaft
9. Lower Camlock
10. Lower Shaft
11. Coil
12. Coil Pivot Assembly
13. Handle Assembly
14. Test Piece
15. Armrest and Strap
Battery Compartment
Contains four NiMH Rechargeable C Cell or
Alkaline batteries. A battery map is provided to
indicate correct alignment of batteries when
inserted into the compartment.
Earset Connector
Provides connection for the Earset.
Main Body
Waterproof housing containing the detector
electronics and batteries.
Controls
Sensitivity knob and keypad containing
Power, Volume UP / Down / Mute, Vibration
and LED Buttons.
Shaft Hinge
Pivot point for unfolding or folding the shafts.
The hinge is only locked in position when the
Handle Assembly is in its deployed position.
Upper, Middle & Lower Shafts
Carbon fibre shafts that are adjustable
for Operator comfort and for changes in
operating positions.
Upper & Lower Camlocks
Self-cleaning locking mechanisms to secure
middle and lower shafts.
Coil
Waterproof open web coil which can be rotated
270 degrees.
Coil Pivot Assembly
Permits the tilt and rotation of the Coil and
provides a tension screw for adjustment
as required.
Handle Assembly
Collapsible handle that contains user interface
buttons and LED display and a latch to permit
quiet set-up and collapse.
Test Piece
Conveniently stowed on the Armrest to allow
the Operator to ensure the detector is working
at its operational capability.
Armrest & Strap
Provided for Operator comfort when the
detector is used for prolonged periods.
The Armrest can also be extended for
Operator comfort.
System Overview | 9