Visual Productions B-STATION2 Manual page 54

Hide thumbs Also See for B-STATION2:
Table of Contents

Advertisement

This universe can be mapped to any of the 256 available universes in the Art-Net
protocol. The universe is entered in the 'subnet.universe' format, i.e. the lowest
universe number is written as '0.0' and the highest universe number is denoted
as '15.15'. The outgoing Art-Net transmission can be disabled by entering 'off'
in the output fields.
Figure 11.6: Art-Net settings
The Destination IP determines where the outgoing Art-Net data will be send to.
Typically, this field contains a broadcast address like 2.255.255.255 which will
send the Art-Net data to the 2.x.x.x IP range. Another typical Art-Net broad-
cast address is 10.255.255.255. When using broadcast address 255.255.255.255
then all the devices on the network will receive the Art-Net data.
It is also possible to fill in a unicast address like 192.168.1.11; in this case the
Art-Net data will be send to one IP address only. This keeps the rest of the
network clean of any Art-Net network messages.
11.6
sACN
The B-Station2 supports 1 incoming sACN universe and 1 outgoing universe.
The universe field should hold a number in the range of [1,63999]. Outgoing
sACN transmission can be disabled by entering off into the sACN output field.
54

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-STATION2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents