Visual Productions B-STATION2 Manual page 18

5. Set OSC IP address
Go to the B-Station2 Settings page and fill in '192.168.1.11:8000' in the
Out IP 1 field in the OSC settings.
Pressing the buttons on the B-Station2 should now activate cues within the
CueCore2.
3.2 Stand-alone control of a RGB fixture
This example will patch one RGB fixture, create a playback with three cues and
assign buttons to those cues. Please take the following steps:
1. Setup power and network
Connect the B-Station2 and the computer to a PoE capable network
switch. Connect the fixture to the B-Station2's DMX connector.
18