Visual Productions B-STATION2 Manual page 33

Append A new cue will be added at the end of the playback.
Insert A new cue will be inserted at the current position.
Replace The selected cue will have its value overwritten.
Merge The selected cue will have its value merged with the values from the programmer.
7.2.4 Load
It is also possible to transfer the content from a cue back to the programmer.
This is useful for altering an existing cue. Make sure a playback is playing the
desired cue. Then press the Load button and then press the playback's Go+
button. In case the playback has multiple cues then a pop-up dialog (figure 7.4)
will allow you to choose which cue to load.
The programmer will now have a copy of the cue's information. Also the fixtures
present in that cue will be automatically selected. After making your changes
you can write back the scene by using the Record button.
7.2.5 Edit
The content of the playback can be exposed by enabling the Edit button and
the clicking on a playback's Go button. This will open the Playback Editor
which is discussed on page 34.
Figure 7.4: Load dialog
33