Table of Contents
Advertisement
2. Connect to the network
Configure the equipment to have the following static IP addresses:
IP
Computer
192.168.1.9
B-Station2
192.168.1.10
CueCore 2
192.168.1.11
The B-Station2 can be set to static IP 192.168.1.10 by long-pressing the
reset button on the device's electronic board.
3. Prepare the CueCore2
Make sure the CueCore2 has six cues inside playback 1. Each cues should
refer to a track with a certain lighting scene. Also, its OSC In port should
be set to 8000. Please refer to the CueCore2's manual for more informa-
tion.
4. Add template
Open a browser on the computer and browse to the web-interface of the
B-Station2 by typing '192.168.1.10' in the browser's address field. Go
to the Show Control page and select the 'CueCore' template. Press the
'Add
' button in the lower left corner of the screen.
Subnet
255.255.255.0
255.255.255.0 (Default static IP)
255.255.255.0
17
Advertisement
Table of Contents
Need help?
Do you have a question about the B-STATION2 and is the answer not in the manual?