Fujitsu D2619-N Technical Manual page 18

Overview
Chips on the system board
®
– Intel 5520 chip set
®
– Intel ICH10 Base (Intel
®
– Intel dual-port Gigabit Ethernet controller Intel 82575EB
– 2 MB SPI flash (BIOS / iSCSI, PXE Bootcode)
– Server Management controller iRMC S2 with integrated graphic controller
– 16 MB SPI flash (code) for iRMC S2
– 1 MB SPI flash (data) for iRMC S2
– 32Mx16-667 DDR2 SRAM for iRMC S2
– SMSC8700 Fast Ethernet
– ADT7462 temperature/system monitoring controller
Graphic
– integrated VGA controller with PCIe x1 interface (Matrox G200)
– 8 MB graphic memory available via driver
– VESA compatible
LAN – Ethernet controller
®
– 1x Intel 82575EB dual-port 10/100/1000 Mbit/s Base-T Ethernet controller
– PXE 2.1 and iSCSI boot support
– IPV6 header offloading
Storage devices
– 2x SATA2 (3 Gbit/s)
– 2x USB 2.0 (internal USB backup drives)
– 1x internal USB 2.0 memory stick
Internal connectors
– 2x serial ATA connectors
– 1x operating panel connector
– 1x video connector (VGA) at the front side
– 1x internal USB stick connector
– 1x USB connector for 3 USB connectors at the front side
– 2x USB connectors for USB tape drives
– 1x connector for USB Flash Module (optional)
– 1x connector for Trusted Platform Module (optional)
– 1x power connector (12 V and 5 V auxiliary)
– 1x combined connector for HDD power supply and fan
18
®
82801JIB)
Technical Manual
Features
D2619-N (RX/TX300 S6)