Fujitsu D2619-N Technical Manual page 12

For primergy rx/tx300 s6
Table of Contents

Advertisement

Notes on safety
V
CAUTION!
Components can become very hot during operation. Ensure you do
not touch components when making extensions to the system board.
There is a danger of burns!
Transmission lines to peripheral devices must be adequately
shielded.
Ethernet cabling has to comply with EN 50173 and EN 50174-1/2
standards or ISO/IEC 11801 standard respectively. The minimum
requirement is a Category 5 shielded cable for 10/100 Ethernet, or
Category 5e for Gigabit Ethernet.
Never connect or disconnect data transmission lines during a storm
(risk of lightning hazard).
Batteries
V
CAUTION!
Incorrect replacement of batteries may lead to a risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (this information doesn't apply to
the Japanese market).
It is essential to observe the instructions in the
lithium
battery".
12
Technical Manual
Important information
chapter "Replacing the
D2619-N (RX/TX300 S6)

Advertisement

Table of Contents
loading

Table of Contents