Table of Contents
Advertisement
PXI-Express chassis: NI PXIe-1071 (4-Slot, Up to 3 GB/s)
•
Power cord for chassis
•
MXI-Express interface: NI PCIe-8381 and PXIe-8381 (Gen 2 x8, 1 Port; incl. one MXI-Express x8
•
copper cable, 3m)
For more advanced, multi-probe users planning to use 3 or more PXIe acquisition modules
simultaneously we recommend:
PXI-Express chassis: NI PXIe-1082
•
Power cord for chassis
•
MXI-Express interface: NI PCIe-8381 and PXIe-8381 (Gen 2 x8, 1 Port; incl. one MXI-Express x8
•
copper cable, 3m)
Figure 2: Recommended PXIe chassis & remote controller combination.
Other chassis-remote controller combinations are technically possible but have not been tested with
Neuropixels probes.
A host PC is needed with:
Windows 7/8.1/10.
•
Dedicated solid state drive for data streaming.
•
At least one PCIe slot (Gen 2 x8 or wider) to install the PXIe remote controller.
•
Please refer to the OpenEphys or SpikeGLX website for exhaustive PC requirements.
Chapter 4 in this
User Manual
1
NI part number: 781368-01 (http://ohm.ni.com/advisors/pxi/pages/common/intro.xhtml, October 2018)
2
NI part number: 763000-01 (US), 763067-01 (EU), 763064-01 (UK) (http://ohm.ni.com/advisors/pxi/pages/common/intro.xhtml,
October 2018)
NI part number: 782522-01 (http://ohm.ni.com/advisors/pxi/pages/common/intro.xhtml, October 2018)
3
4
NI part number: 780321-01 (http://ohm.ni.com/advisors/pxi/pages/common/intro.xhtml, October 2018)
5
NI part number: 763000-01 (US), 763067-01 (EU), 763064-01 (UK) (http://ohm.ni.com/advisors/pxi/pages/common/intro.xhtml,
October 2018)
6
NI part number: 782522-01 (http://ohm.ni.com/advisors/pxi/pages/common/intro.xhtml, October 2018)
NEUROPIXELS 1.0 USER MANUAL V1.0.5
.
2
3
.
.
4
.
5
6
.
Chassis NI PXIe-1082
NI PXIe-8381 Remote
Control Module in slot
1 of the chassis
contains further instructions on how to install the above hardware.
.
1
x8 MXI-Express cable
NI PCIe-8381 board
with one x8 PCIe link
8
Advertisement
Table of Contents
