Table of Contents
Advertisement
Operator manual
3.2.6
Remove the can
1. Make sure that the machine is ready.
2. Open the doors (A). Use the handle (B).
3. Remove the can handle retainer from the can handle.
4. Remove the can.
3.2.7
Stop the operation manually
1. Push the stop/up key.
2. Wait until the display shows "rdY". The doors are unlocked.
3. If necessary, remove the can. See § 3.2.6.
3.2.8
Using the emergency stop switch
1. Push the emergency stop switch (A). The machine stops
immediately.
2. Solve the problem as quickly as possible.
3. Reset the emergency stop switch by turning the emergency
stop switch.
4. Press one of the keys to start the machine.
SK300 CE
Note
The display shows the selected shake time.
Note
The door will unlock after shaking when the
display shows 'rdY'.
Note
If the can plate and the can table are too close
to each other, use the stop/up key to move up
the can plate, see § 3.1.2.
CAUTlON
Only push the emergency stop switch in case
of a safety emergency. Do not use the
emergency stop switch as an on/off function!
Note
After the reset, the machine is on and initiated
when the display shows ' --- '.
B
14
A
A
V. 1.0
A
Advertisement
Table of Contents
