Type Plate: Details; Operation; Turning On The Machine; Turning On The Machine When The Machine Is In Hibernation - Idex FAST&FLUID SK300 CE Manual

Operator manual
3.1.5

Type plate: details

3.2

Operation

3.2.1

Turning on the machine

1. Connect the power cable to the grounded wall socket.
2. Make sure that the emergency stop switch is released.
3. Set the on/off switch to 'ON'. When the machine is on, the
display shows ' --- '.
3.2.2

Turning on the machine when the machine is in hibernation

When the machine is in hibernation, the illumination of the display
is off and the display shows '.'.
1. Push any key. When the machine is on, the display shows
' --- '.
3.2.3

General shaking procedure

1. Place the can. See § 3.2.4.
2. Start the machine, See § 3.2.5.
3. Remove the can. See § 3.2.6.
WARNlNG
Only push the emergency stop switch in the case of
a safety emergency.
Make sure that the problem is solved before you
reset the emergency stop switch.
WARNlNG
If you use the machine continuously, it is advised to
use hearing protection. Prolonged exposure to the
noise level of the machine can damage your
hearing.
SK300 CE
11
V. 1.0