Remove The Transport Brackets; Dispose Of The Packaging Material; Put The Machine In Position; Move The Machine From The Pallet - Idex FAST&FLUID SK300 CE Manual

lnstallation
4.1.5

Remove the transport brackets

1. Remove the screws (A).
2. Remove the transport brackets (B).
4.1.6

Dispose of the packaging material

1. Dispose of the packaging material in an environmentally
friendly way, according to local regulations, see § 2.7.
4.2

Put the machine in position

4.2.1

Move the machine from the pallet

1. Optionally, place a ramp (A).
2. Push the machine from the pallet on to the ground.
4.2.2

Move the machine to the final location

WARNlNG
Do not use a forklift.
SK300 CE
18
B
A
V. 1.0
17mm
A
4x