Advertisement
Quick Links
Akron Brass Company | akronbrass.com | 1-800-228-1161
343 Venture Blvd |Wooster, Ohio 44691
REV001 4/20
FSG-MNL-00220
FS100 QUICKSTART GUIDE
TM
#1
COMMISSIONING
Review all safety warnings in the manual before operating the unit.
Before using the unit, the user manual should be read and the unit
needs to be put into service by hooking up the proper AGM
battery, priming the unit, and testing operation.
The label on the tank has a place to write down the chemical
currently in use and the date added.
#2
SURFACE PREP
Clean heavily soiled areas with soap and water first before
disinfecting, per recommendation of the area having jurisdiction
(AHJ).
#3
SAFETY REQUIREMENTS
Only use this product with approved disinfectants suitable for use
with the FS100.*
Refer to the SDS sheets and authority having jurisdiction (AHJ) for
the proper PPE, concentration, and application methods.
*Refer to active ingredient compatibility list in the FS100™ user
manual
The Water Flow Experts
ATTENTION
WARNING
IMPORTANT
NOTICE
IMPORTANT
NOTICE
IMPORTANT
NOTICE
ATTENTION
CAUTION
ATTENTION
WARNING
Advertisement
Related Manuals for Idex Akron Brass FS100
Summary of Contents for Idex Akron Brass FS100
- Page 1 FS100 QUICKSTART GUIDE COMMISSIONING ATTENTION WARNING Review all safety warnings in the manual before operating the unit. IMPORTANT NOTICE Before using the unit, the user manual should be read and the unit needs to be put into service by hooking up the proper AGM battery, priming the unit, and testing operation.
- Page 2 FS100 QUICKSTART GUIDE FILLING UP RESERVOIR ATTENTION CAUTION • Before starting, check to ensure the reservoir is empty. • If the reservoir is not empty, remove excess liquid and flush the system with water. • Once the reservoir is cleaned and empty, use the 4-inch open- ing on top to fill it with the disinfectant recommended by your AHJ in the concentration compliant with the EPA label and the FS100™chemical compatibility list.
- Page 3 FS100 QUICKSTART GUIDE TURNING THE SYSTEM ON System is turned on via the on/off switch. ATTENTION CAUTION The pump will pressurize the fluid, which can be expelled via the trig- ger on the wand. APPLYING THE PRODUCT Ensure the work area is well ventilated in accordance with OSHA, NIOSH, or AHJ standards.