Table of Contents
Advertisement
Video IN/OUT can be PAL or NTSC standard (but not both at once).
RCA plugs are for CVBS (Composite). MINIDIN are for Y/C (separate Luminance / Chrominance)
Timing:
Horizontal scan frequencies:
Vertical scan frequencies:
Color subcarriers:
Levels on RCA:
Tip: 700mVpp Composite Signal + 300mVpp Composite Sync,
75Ω Nominal Impedance
Jacket:
Ground for tip
Levels on MINIDIN:
Pin 4:
700mVpp Luminance Signal + 300mVpp Composite Sync,
75Ω Nominal Impedance
Pin 3:
300mVpp Chrominance Signal,
75 Ω Nominal Impedance
Pins 1 and 2:
Ground for Pins 3 and 4
Pin connection (LAN IN):
Pin 1: Transmit data (+)
Pin 2: Transmit data (-)
Pin 3: Receive data (+)
Pin 4: N.C.
Pin connection (LAN OUT / direct PC connection):
Pin 1: Receive data (+)
Pin 2: Receive data (-)
Pin 3: Transmit data (+)
Pin 4: N.C.
LAN IN can be directly connected to a 10/100Mb LAN using a standard CAT5 cable. The LAN switch supports MDI/MDI-X
auto-sense crossover cables. Pin characteristics are consistent with 10/100baseT LAN standards.
VIDEO IN/OUT
RCA
15625 Hz for PAL
15734 Hz for NTSC
50 Hz for PAL
60 Hz for NTSC
(both interlaced)
4.433619 MHz for PAL
3.579545 MHz for NTSC
LAN SWITCH 10/100 BASE T
RJ45
Pin 5: N.C.
Pin 6: Receive data (-)
Pin 7: N.C.
Pin 8: N.C.
Pin 5: N.C.
Pin 6: Transmit data (-)
Pin 7: N.C.
Pin 8: N.C.
MINIDIN
89
Advertisement
Table of Contents
