Table of Contents
Advertisement
H.243 function
From the fullscreen page of MCU manager or a participant terminal is possible to get MCU control, conforming to H.243
protocol, by pressing the BLUE key.
A page will appear, where is possible to:
•
Request Chair control
Close conference
•
Send local on air
•
For each terminal in the list
Information: connected users
See
Send on air
Disconnect
Remote terminals disposition and visualization
With MCU on and various connected terminals, is possible to choose disposition and how many video flows should be
displayed. From the fullscreen page of the manager, press right or left keys to select the "terminals disposition" icon, and
press OK.
Once the window is opened:
1. By means of up and down keys choose the visualization mode, then confirm selection with OK key.
2. Close the window by means of the OK icon, or with the X icon to discard selection.
Note:
If Continuous Presence transmission is enabled in configuration (see Multiconference setup chapter), "terminal
disposition" is sent to all terminals
"Terminals disposition" icon
"Video Zoom +" icon
"Video Zoom -" icon
68
Advertisement
Table of Contents
