Advertisement
Installation of your alarm
1. Unplug the existing telephone
connection from the master wall
socket and plug the telephone
connector into the telephone
lead/adapter (item 5, green tape).
Connect the telephone lead/adaptor
TEL
to the
socket on the personal
alarm unit. Plug the adaptor into the
telephone socket on the wall.
2. Connect the power supply (item 4,
yellow tape) to the wall socket and
connect the power supply lead to the
POWER
socket on the personal
alarm unit.
3. Turn the power switch to the ON
position. Check that the indicator
lamp has a steady green light.
4. Lift the telephone receiver and
check that you can hear the tone.
5. Carry out a test alarm from the
personal alarm unit. See 'Making
a Test Call' .
Advertisement
