Advertisement
Confi guration Mode of MicroBrowser (Kiosk-Mode)
1. The MicroBrowser can run in "Kiosk-Mode" where the menu and the task
bar will disappear.
To activate the Kiosk-Mode open My Device\Flash\MicroBrowser and
doubleclick on the icon KioskMode.
2. To activate the menu and task bar doubleclick the icon NoKioskMode.
Default is NoKioskMode.
Autostart of MicroBrowser
1. To automatically start the MicroBrowser at startup of the
Control Panel open My Device\Flash\MicroBrowser and
doubleclick the icon Enable_Autostart.
2. To deactivate the autostart of the MicroBrowser doubleclick
the icon Disable_Autostart.
Start MicroBrowser
To start the MicroBrowser doubleclick the icon MicroBrowser.
The dialog of the host or IP address appears.
Default remote address is
"http://192.168.0.1/webvisu.htm".
Change this IP address to the address of your remote web server (IP address of target PLC).
This address will be stored unless you change to Kiosk-Mode or NonKiosk-Mode
like described above.
To access the CoDeSys web server of AC500 type
If you select the checkbox Always use these settings
this confi guration dialog will not appear
anymore, unless you change to Kiosk-Mode
or NonKiosk-Mode like described above.
webvisu.htm
in the fi eld Path or full URL.
2
Exit MicroBrowser
• If the MicroBrowser is not running in Kiosk-Mode use File\Exit from the menu bar.
• If the MicroBrowser is running in Kiosk-Mode connect a USB-Keyboard and
press <Shift> + <X>
• In the CoDeSys visualization an exit button can be created. Choose the
category Input.
Enable Execute program. Select (INTERN) EXITPROGRAM as confi gured
program.
• If Autostart is enabled and no keyboard is available:
Create a fi le autoexec.bat with the following line "del \Flash\autoexec.bat".
Copy this fi le to the root of an USB-Stick and insert it while the
Control Panel is running.
Reboot the Control Panel. After the reboot the autostart is disabled.
3
2CDC159011M0201 / 08.2011
Advertisement
