Procedure - Toshiba LF622 Quick Start Manual

Range – default set at – 2500 gal/min
-
(Note 2. After setting up and converter and detector are connected and powered up, a
verification of excitation current can be done, as a sanity check. A combine style magmeter
generally needs no configuration, but is ready to go out of the box.)

11.1 Procedure

- After converter has been connected and power up, hold finger over the center key for 3
seconds or longer (cover don't have to be removed) and enter code (a series of arrows)
displayed on the screen. (if code is not entered correctly "unlocking failure" error will be
displayed, and after three (3) failed attempts, unit will resort to the measurement screen )
- After correct code is entered, chose the [SET] option
Next select DETAIL ED from the menu selection
-
3