Pairing When The X1S Is Turned Off - Sena X1S User Manual

3 Pairing tHe BluetootH SyStem witH otHer BluetootH DeviCeS
1. Press and hold the (+) Button and Center Button for 1 second.
Phone Pairing
=
"Phone Pairing"
Alternating blue and red flashing lights indicate the device
=
is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select Sena X1S
in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.

3.1.2 Pairing When the X1S is Turned Off

1. Press and hold the (+) Button and Center Button for 5 seconds
when the X1S is turned off.
Phone Pairing
=
"Phone Pairing"
Alternating blue and red flashing lights indicate the device
=
is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select Sena X1S
in the list of devices detected.
HOLD
1s
HOLD
5s
Sena X1S Smart Cycling Helmet | 19