Sena X1 PRO Manual
  1. Manuals
  2. Brands
  3. Sena Manuals
  4. Motorcycle Accessories
  5. X1 PRO
  6. Manual

Sena X1 PRO Manual

Smart cycling helmet
Hide thumbs Also See for X1 PRO:
Table of Contents

Advertisement

Quick Links

Download this manual
Smart CyCling Helmet
menU

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X1 PRO and is the answer not in the manual?

Questions and answers

Related Manuals for Sena X1 PRO

Summary of Contents for Sena X1 PRO

  • Page 1 Smart CyCling Helmet menU...
  • Page 2 CLICK SECTION ABOUT THE BLUETOOTH BEGIN HELMET MODULE CAMERA PAIRING WITH MOBILE OPERATION DEVICES PHONE USAGE INTERCOM USING THE STEREO SETUP FM RADIO MUSIC CAMERA CONFIG. REMOTE HEADSET CONFIG. SETTINGS CONTROL SETTINGS TROUBLE- MAINTENANCE SHOOTING AND CARE...
  • Page 3 Highlighted Button(s) to tap or Hold HOLD Press and Hold button for button the specified the specified amount of time number of times audible prompt from the Bluetooth Module “Hello” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 3...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS 1. ABOuT THE X1 PRO SMART CYCLING HELMET 1.1 general information 1.2 Product Details 1.3 Wearing the Helmet 1.3.1 How to Wear the Helmet 1.3.2 Helmet Fitment Check 2. GETTING STARTED 2.1 Button Functions 2.1.1 left Side 2.1.2...
  • Page 5 TABLE OF CONTENTS CONTINUED 4. PAIRING THE HELMET WITH OTHER BLuETOOTH DEVICES 4.1 mobile Phone 4.2 additional mobile Phones or mP3 Player 4.3 advanced Selective Pairing: Hands-Free or a2DP Stereo 4.3.1 Phone Selective Pairing — Hands-Free Profile 4.3.2 media Selective Pairing — a2DP Profile 5.
  • Page 6 TABLE OF CONTENTS CONTINUED 7.6 Universal intercom 7.7 advanced noise Control™ (Default: enable) 8. uSING THE FM RADIO 8.1 Fm radio On/Off 8.2 Seek and Save radio Stations 8.3 Scan and Save radio Stations 8.4 temporary Station Preset 8.5 navigating Preset Stations 8.6 region Selection (Default: Worldwide) 8.7 radio Data System(rDS)
  • Page 7 TABLE OF CONTENTS CONTINUED 11. REMOTE CONTROL 11.1 Pairing with the remote Control 12. TROuBLESHOOTING 12.1 Fault reset 12.2 Factory reset 13. MAINTENANCE AND CARE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 7...

  • Page 8: About The X1 Pro Smart Cycling Helmet

    • Do not modify or remove any original part of the helmet. Do not use heat damaged helmets. Heat damaged helmets will appear to have uneven or have bubbly surfaces. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 8...
  • Page 9 Please refer to Section 1.3: “Wearing the Helmet” for more details about properly securing and wearing your helmet. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 9...
  • Page 10 1. ABOUT THE X1 PRO SMART CYCLING HELMET Warning: general • The contents of this Sena X1 Pro Smart Cycling information Helmet User’s Guide are subject to change without notice. Its illustrations may differ from Product the actual product. The copyrights for the Details User’s Guide belong to Sena Technologies, Inc.

  • Page 11: Product Details

    MicroSD information Card Slot* Bluetooth Buttons Product Details Wearing the Helmet QHD Action Camera DC Power Charging & Firmware Upgrade Speakers Camera Control Buttons Microphone * MicroSD card not included. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 11...

  • Page 12: Wearing The Helmet

    All fitment adjustments need to be made with the helmet in the proper position. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 12...
  • Page 13 3. Position the helmet low on your forehead with the buckle under the chin and back Product against the throat. The straps should fit Details comfortably around both ears. Wearing the Helmet Strap Adjuster Buckle Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 13...
  • Page 14 When properly adjusted the helmet will wrap around your head and cradle it with firm, but comfortable pressure. Chinstrap O-Ring Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 14...
  • Page 15 6. To change the height of the retention Retention system, firmly pull or push the retention System Knob system upward or downward to a different position. Retention System Retention System Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 15...

  • Page 16: Helmet Fitment Check

    Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 16...
  • Page 17 Parents: Instruct children to follow this warning. Failure to follow this warning could result in serious personal injury, death or death by strangulation. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 17...

  • Page 18: Getting Started

    WiFi Power On/Off Button Enter Camera Confi guration WiFi Power On/Off Settings Enter Camera Confi guration Settings Camera Button Camera Button Camera Power On/Off Start/Stop Recording Camera Power On/Off Start/Stop Recording Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 18...

  • Page 19: Front Side

    (+) Button at the same time for 1 second to turn Volume the headset on or off. adjustment Powering On Downloadable Sena Software HOLD Configuration POWER ON menu DEVICE Powering Off POWER OFF DEVICE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 19...

  • Page 20: Charging

    Volume adjustment Downloadable Sena Software Configuration menu DC Power Charging & Firmware Upgrade Port Depending upon the charging method, the Bluetooth Module will be fully charged in about 2.5 hours. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 20...
  • Page 21 Downloadable Sena Software Configuration MEDIUM menu Battery Level — Audible Method note: Blinking LEDs alternate from blue to red when battery power is low. HOLD AUDIBLE METHOD “Battery level high/medium/low” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 21...

  • Page 22: Volume Adjustment

    (+) Button or the (-) Button. Volume is set and maintained independently at different levels for Configuration each audio source (i.e., phone, intercom), even menu when the headset is rebooted. Volume Up VOLUME UP Volume Down VOLUME DOWN Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 22...

  • Page 23: Downloadable Sena Software

    Devices” for more details). Run the Sena Smartphone app and configure the settings directly from your smartphone. You can download the Sena Smartphone app for Android and Apple operating systems. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 23...

  • Page 24: Sena Camera App

    Center Button for 10 seconds until you hear the voice prompt, “Configuration menu.” Accessing the Confi guration Menu HOLD ACCESS CONFIG. MENU Navigating Forward through the Menu Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 24 NAVIGATE...
  • Page 25 3. You can enable/disable the feature or “[Menu prompt]” execute the command by tapping the Center Button. Enable/Disable or Execute a Feature ENABLE OR DISABLE ENABLE OR DISABLE EXECUTE EXECUTE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 25...
  • Page 26 RDS AF Setting Enable/Disable Configuration menu Enable/Disable FM Station Guide Advanced Noise Control Enable/Disable Execute Delete All Pairings Remote Control Pairing Execute Execute Universal Intercom Pairing Factory Reset Execute Execute Exit Configuration Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 26...

  • Page 27: Camera Configuration Setting

    Navigating Backward through the Menu NAVIGATE FORWARD “[Menu prompt]” NAVIGATE BACKWARD Navigating Backward through the Menu “[Menu prompt]” Enable/Disable or Execute a Feature NAVIGATE BACKWARD “[Menu prompt]” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 27 ENABLE OR DISABLE...
  • Page 28 Button. To exit the Camera Configuration Volume menu, tap the multi-Function Button. adjustment ENABLE OR DISABLE Enable/Disable or Execute a Feature Downloadable Sena Software EXECUTE Configuration menu ENABLE OR DISABLE EXECUTE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 28...
  • Page 29 • You cannot record videos without a microSD card. • Your SD card needs to be formatted using the X1 Pro before using the camera. Please refer to Section 2.7.2: “Camera Configuration Setting” for more details. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 29...

  • Page 30: Camera Operation

    “Recording” will hear a voice prompt, “recording” or “recording stopped” to start or stop video recording. Green LED Flashing CAMERA LED STATUS Stop Video Recording HOLD STOP RECORDING Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 30...

  • Page 31: Loop Recording Mode

    2. Press and hold the Camera Button for 1 second until you will hear a voice prompt, “recording”. or “recording stopped” to start or stop loop video recording. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 31...
  • Page 32 1 h 12 min 1 h 5 min 1 h 5 min 2 h 24 min 16gB 2 h 11 min 2 h 11 min 4 h 48 min 32gB Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 32...
  • Page 33 • The maximum size per video is limited to 4GB. Therefore, when the video reaches the 4GB size limit during recording, it saves and creates a new video to continue recording. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 33...

  • Page 34: Pairing The Helmet With Other Bluetooth Devices

    Sena headsets. Pairing: Bluetooth Hands-Free Communication Module or a2DP Stereo Pairs with up to three Sena Headsets Also pairs with: Mobile Phone Player Devices Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 34...

  • Page 35: Mobile Phone

    fl ashing lights indicate device is now discoverable. BLUETOOTH LED STATUS 2. With your mobile phone in Bluetooth-pairing mode, select Sena X1 Pro in the list of devices detected. PIN NUMBER Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 35...

  • Page 36: Additional Mobile Phones Or

    Sena headsets. 1. Execute Second mobile Phone Pairing in the Configuration menu. Access Second Mobile Phone Pairing in the Confi guration Menu HOLD ACCESS CONFIG. MENU “Confi guration menu” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 36 NAVIGATE...
  • Page 37 BLUETOOTH LED STATUS Alternating blue and red 2. With your mobile phone in Bluetooth-pairing fl ashing lights indicate mode, select Sena X1 Pro in the list of devices device is now discoverable. detected. PIN NUMBER BLUETOOTH 3. If your mobile phone asks for a PIN, enter 0000.

  • Page 38: Advanced Selective Pairing: Hands-Free Or A2Dp Stereo

    Confi guration Menu Stereo HOLD ACCESS CONFIG. MENU “Confi guration menu” NAVIGATE FORWARD “Phone selective pairing” Blue fl ashing lights indicates device is now discoverable. BLUETOOTH LED STATUS PIN NUMBER Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 38...

  • Page 39: Media Selective Pairing - A2Dp Profile

    Access Media Selective Pairing in the Confi guration Menu HOLD ACCESS CONFIG. MENU “Confi guration menu” NAVIGATE FORWARD “Media selective pairing” Red fl ashing light indicates device is now discoverable. BLUETOOTH LED STATUS Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 39...
  • Page 40 Phone BLUETOOTH 3. If it asks for a PIN, enter 0000. LED STATUS additional mobile Phones or mP3 Player PIN NUMBER advanced Selective Pairing: Hands-Free or a2DP Stereo Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 40...

  • Page 41: Mobile Phone Usage

    HOLD END/REJECT Make a Call with Voice Dialer HOLD VOICE DIAL note: If you have a GPS device connected, you will not hear its voice navigations during a phone call. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 41...

  • Page 42: Speed Dialing

    Assigning Speed Dial Presets HOLD ACCESS CONFIG. MENU “Confi guration menu” NAVIGATE FORWARD “Speed dial” EXECUTE Navigate Forward through Preset Numbers NAVIGATE FORWARD “Speed dial (#)” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 42...
  • Page 43 Then, you will hear the voice prompt, “Save speed dial (#).” This MOBILE PHONE confirms that the number was saved. “Save speed dial (#)” Exit Menu EXIT MENU Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 43 “Cancel”...
  • Page 44 (-) Button until you hear the voice prompt, “Save speed dial (#)” EXIT “Cancel,” then tap the Center Button to MENU confirm. “Cancel” Exit Menu EXIT MENU CONFIRM CANCEL “Cancel” CONFIRM CANCEL Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 44...

  • Page 45: Using Speed Dial Presets

    Call a Speed Dial Preset Number NAVIGATE BACKWARD “Speed dial (#)” Call a Speed Dial Preset Number “Speed dial (#)” SPEED DIAL Redial Last Number SPEED DIAL “Last number redial” Redial Last Number Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 45...
  • Page 46 Center Button when you hear the NAVIGATE prompt, “Speed dial (#).” BACKWARD Call a Speed Dial Preset Number “Speed dial (#)” SPEED DIAL Redial Last Number “Last number redial” REDIAL Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 46...

  • Page 47: Stereo Music

    2. To adjust the volume, tap the (+) Button or the (-) Button. HOLD Volume Up SKIP TRACK FORWARD Previous Track VOLUME UP Volume Down HOLD SKIP TRACK BACKWARD VOLUME DOWN Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 47...

  • Page 48: Music Sharing

    Both you and your intercom Friend can control music playback. Sharing Music with an Intercom Friend during Intercom Conversation HOLD SHARE MUSIC “[Beep, Beep]” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 48...

  • Page 49: Intercom Setup

    “intercom pairing”. intercom Pairing with Intercom B Universal intercom advanced noise HOLD Control™ & INTERCOM FRIEND B “Intercom pairing” Red fl ashing light indicates device is now discoverable. BLUETOOTH LED STATUS Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 49...
  • Page 50 Blue fl ashing LED confi rms advanced intercoms are paired. noise Blue fl ashing LED confi rms Control™ BLUETOOTH intercoms are paired. LED STATUS Pairing with Intercom Friends BLUETOOTH LED STATUS Pairing with Intercom Friends Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 50...
  • Page 51 Conference Phone Call with Intercom Intercom intercom Friend 1 Friend 2 Users group intercom Universal Intercom Intercom Intercom Friend 1 Friend 2 Friend 3 intercom advanced noise Control™ Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 51...

  • Page 52: Two-Way Intercom

    Start/End Two-Way Intercom with Intercom Friend 3 3. Tap three times for intercom Friend 3. advanced noise Start/End Two-Way Intercom with Intercom Friend 3 Control™ INTERCOM FRIEND 3 INTERCOM FRIEND 3 INTERCOM FRIEND 3 Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 52...

  • Page 53: Multi-Way Intercom

    Friend (B). Or, intercom Friend (B) may start an intercom call with you (a). Intercom Intercom Friend B Friend C Starting an Intercom Conversation with Intercom Friend C Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 53...
  • Page 54 (B & C) are having a three-Way intercom Intercom Intercom Intercom Intercom Friend B Friend C Conference. Friend B Friend C Three-Way Conference Intercom Intercom Friend B Friend C Intercom Intercom Friend B Friend C Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 54...

  • Page 55: Starting A Four-Way Intercom Conference

    Friend to the mobile phone conversation. 1. During a mobile phone call, tap the Center Button to invite one of your intercom Friends to the conversation. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 55...
  • Page 56 End Phone Call CALL noise Control™ MOBILE HOLD CALL MOBILE CALL note: When you have an incoming intercom call during a mobile phone call, you will hear a voice prompt, “intercom requested.” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 56...

  • Page 57: Group Intercom

    “Group intercom” “Group intercom connected” everyone will hear the voice prompt, “group intercom connected.” End Group Intercom “Group intercom connected” HOLD End Group Intercom END GROUP INTERCOM HOLD Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 57 “Group intercom terminated”...

  • Page 58: Universal Intercom

    Control™ is paired via Second mobile Phone Pairing, it will be disconnected. 1. Execute Universal intercom in the Configuration menu. Please refer to Section 2.7: “Configuration menu” for more details. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 58...
  • Page 59 “Universal intercom” Universal intercom advanced noise Control™ EXECUTE 2. Put the non-Sena Bluetooth headset in Pairing Mode. The X1 Pro Smart Cycling Helmet will automatically pair with a non-Sena Bluetooth headset. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 59...

  • Page 60: Advanced Noise Control™ (Default: Enable)

    If advanced noise Control is enabled, background noise is reduced during intercom conversations. If advanced noise Control is disabled, the background noise is mixed with your voice while using the intercom Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 60...
  • Page 61 ACCESS multi-Way CONFIG. MENU intercom “Confi guration menu” three-Way Conference Phone Call with intercom Users NAVIGATE group BACKWARD intercom Universal “Noise control” intercom advanced noise Control™ ENABLE OR DISABLE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 61...

  • Page 62: Using The Fm Radio

    FM RADIO Stations temporary “[Beep, Beep]” Station Preset navigating FM Radio Off Preset Stations HOLD region Selection FM RADIO radio Data System(rDS) “[Beep, Beep]” alternative (aF) Setting Fm Station guide Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 62...

  • Page 63: Seek And Save Radio Stations

    MODE Fm Station guide ENTER “Preset (#)” PRESET MODE Navigate Forward through Preset Stations “Preset (#)” Navigate Forward through Preset Stations NAVIGATE FORWARD Navigate Backward through Preset Stations NAVIGATE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 63 FORWARD...
  • Page 64 Save Station to the Preset Number SAVE TO alternative PRESET # (aF) Setting HOLD Delete Station from Memory Fm Station guide SAVE TO HOLD PRESET # Delete Station from Memory DELETE STATION HOLD DELETE STATION Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 64...

  • Page 65: Scan And Save Radio Stations

    START Station Preset SCANNING Scan and Save Radio Stations Save the Current Station 2. The Sena tuner pauses at each station it finds for navigating 8 seconds before moving to the next. Preset HOLD Stations 3. To save the current station, tap the Center Button.

  • Page 66: Temporary Station Preset

    10 stations. Stations Temporary Stations region Selection radio Data System(rDS) TEMPORARY STATIONS alternative (aF) Setting 2. The temporary preset stations will be cleared when the Bluetooth Module reboots. Fm Station guide Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 66...

  • Page 67: Navigating Preset Stations

    You can use the Sena Device manager or navigating the Sena Smartphone app to save the preset Preset stations. Stations region Selection radio Data System(rDS) alternative (aF) Setting Fm Station guide Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 67...

  • Page 68: Region Selection (Default: Worldwide)

    When radio station signals get too weak for good reception, with rDS aF enabled, the Sena radio receiver re-tunes to a station with better reception. If rDS aF is disabled, you’ll have to find stronger stations manually. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 68...
  • Page 69 Save radio “Confi guration menu” Stations temporary Station Preset navigating NAVIGATE Preset FORWARD Stations region “RDS AF setting” Selection radio Data System(rDS) alternative (aF) Setting ENABLE OR DISABLE Fm Station guide Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 69...

  • Page 70: Fm Station Guide (Default: Enable)

    HOLD navigating Preset ACCESS Stations CONFIG. MENU region “Confi guration menu” Selection radio Data System(rDS) alternative (aF) Setting NAVIGATE Fm Station FORWARD guide “FM station guide setting” ENABLE OR DISABLE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 70...

  • Page 71: Headset Configuration Settings

    If Voice prompt is disabled, Voice prompts are silenced except for those in the Configuration Menu, battery level indication, speed dial, and FM radio functions. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 71...
  • Page 72 Access Voice Prompt in the Confi guration Menu Function Priority HOLD Firmware Updates ACCESS CONFIG. MENU Voice Prompts “Confi guration menu” Deleting all Bluetooth Pairing information NAVIGATE FORWARD “Voice prompt” ENABLE OR DISABLE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 72...

  • Page 73: Deleting All Bluetooth Pairing Information

    Bluetooth Pairing information stored in the Prompts headset. Deleting all Access Delete All Pairings in the Confi guration Menu Bluetooth Pairing HOLD information ACCESS CONFIG. MENU “Confi guration menu” NAVIGATE BACKWARD “Delete all pairings” EXECUTE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 73...

  • Page 74: Camera Configuration Settings

    Access Video Mode in the Camera Confi guration Menu HOLD auto Camera Sleep ACCESS CAMERA CONFIG. Format SD MENU Card “Camera setup” NAVIGATE FORWARD “Video mode setting” VIDEO MODE OR LOOP RECORDING MODE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 74...

  • Page 75: Video Resolution

    Access Video Resolution in the Camera Confi guration Menu Smart audio HOLD auto Camera ACCESS CAMERA Sleep CONFIG. MENU Format SD Card “Camera setup” NAVIGATE FORWARD “Video resolution setting” 1440P/30FPS, 1080P/60FPS, 1080P/30FPS Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 75...

  • Page 76: Date Caption

    Smart audio Access Date Caption in the Camera Confi guration Menu HOLD auto Camera ACCESS Sleep CAMERA CONFIG. MENU Format SD Card “Camera setup” NAVIGATE FORWARD “Date caption” ENABLE OR DISABLE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 76...

  • Page 77: Smart Audio Mix Tm On/Off

    Access Speaker Sound Recording in the Camera auto Confi guration Menu Camera Sleep HOLD Format SD Card ACCESS CAMERA CONFIG. MENU “Camera setup” NAVIGATE BACKWARD “Speaker sound recording” ENABLE OR DISABLE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 77...

  • Page 78: Auto Camera Sleep

    Access Auto Camera Sleep in the Camera Confi guration Menu auto HOLD Camera Sleep ACCESS CAMERA Format SD CONFIG. MENU Card “Camera setup” NAVIGATE BACKWARD “Auto camera sleep” ENABLE OR DISABLE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 78...

  • Page 79: Format Sd Card

    Smart audio Access Format SD Card in the Camera Confi guration Menu auto HOLD Camera Sleep ACCESS CAMERA Format SD CONFIG. MENU Card “Camera setup” NAVIGATE BACKWARD “Format SD card” EXECUTE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 79...

  • Page 80: Remote Control

    2.7.1: “Headset Configuration Setting” for more details. Access Remote Control Pairing in the Confi guration Menu HOLD ACCESS CONFIG. MENU “Confi guration menu” NAVIGATE BACKWARD “Remote control pairing” EXECUTE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 80 Enter Pairing Mode...
  • Page 81 Remote Control. “remote control connected,” when they are successfully paired. REMOTE EXECUTE CONTROL Enter Pairing Mode “Remote control connected” Enter Pairing Mode on Remote Control. REMOTE CONTROL “Remote control connected” Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 81...

  • Page 82: Troubleshooting

    Please visit sena.com for answers to frequently asked questions. This detailed online FAQ section deals with Fault reset troubleshooting, illustrates case studies and contains tips on using the Sena X1 Pro Smart Cycling Helmet. Factory reset Click Here to Visit Sena.com 12.1 Fault reset...

  • Page 83: Factory Reset

    Configuration menu. Please refer to Section 2.7: “Configuration menu” for more details. Access Factory Reset in the Confi guration Menu HOLD ACCESS CONFIG. MENU “Confi guration menu” NAVIGATE BACKWARD “Factory reset” EXECUTE Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 83...

  • Page 84: Maintenance And Care

    13. Maintenance and care The inner lining of the Sena X1 Pro Smart Cycling Helmet is completely removable. Its headliner can be washed by hand using only water, mild soap, at a maximum temperature of 30ºC (86ºF), and non- abrasive cloths to clean the helmet’s shell, pads...
  • Page 85 The useful life of your helmet may be less than five years as a result of exposure to sunlight, rough, handling/storage that results in dents or cuts or as a result of heavy use. Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 85...
  • Page 86 ® the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone and iPod touch are ® ® registered trademarks of Apple Inc. Version 1.0.0 Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 86...

Table of Contents