The below table will show different fields used on debug page:
Required Options
File Name
Enter the name of the capture file that will be generated.
Interface
Choose a SSID as Interface on which the traffic will be captured.
Device
Choose a device plugged to USB port to save the capture once started.
Advanced Options
File Size
Set a File size that the capture will not exceed.
Rotate Count
Set a value for rotating captures.
Choose if you want to get all traffic or only outgoing or incoming to the chosen
Direction
interface.
Figure 30: Capture Page
Table 15: Debug
GWN7602 User Manual
Version 1.0.15.20
P a g e
|
53