F&Wave System Device; Battery Change - F&F FW-WS3 Manual

F&Wave system device
Transmitters
flush-mounted
FW-RC4-AC, FW-RC5
remote controls
FW-RC4, FW-RC10
wall buttons
FW-WS1, FW-WS2, FW-WS3

Battery change

Fold up the buttons.
Remove the battery from the holder.
Install a new battery paying close attention to the correct polarity.
The "+" sign on the battery up.
Close the buttons and then set up the frame with notch facing up.
Do not dispose of the used batteries in the trash!
User is obliged to hand over waste batteries to the collection point for recycla-
ble materials.
Receivers
Single relay
Double relay
Universal dimmer
Roller blind controller
Dual-channel LED controller
Remove the frame by prying it gently with a flat tool in the
cut dedicated to this purpose.
- 5 -
Ø60 box DIN rail
FW-R1P FW-R1D
FW-R2P FW-R2D
FW-D1P FW-D1D
FW-STR1P FW-STR1D
FW-LED2P FW-LED2D