Download Print this page

F&F AZH-MINI-LED Quick Start Manual

Twilight switch, hermetically sealed

Advertisement

Quick Links

AZH-MINI-LED
Twilight switch,
hermetically sealed
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge
and can give any amount to up to that end point of collec� on, as well as to sto-
re the occasion of the purchase of new equipment (in accordance with the prin-
ciple of old-for-new, regardless of brand). Electro thrown in the trash or abando-
ned in nature, pose a threat to the environment and human health.
Purpose
The AZH-MINI-LED is a twilight switch with a built-in light sensor,
enclosed in a hermetically sealed housing and specially adapted
to switch on the LED lighting. By using a switching element that
guarantees correct operation with current pulses up to 120 A/
20 s, the AZH-MINI-LED automatic switch successfully manages
to switch on and off the LED lighting, which, despite its energy
efficiency generates at the moment of switching strong current
surges that effectively destroy classic relays.
Functioning
The twilight switch should be placed in a place with constant ac-
cess to natural daylight. Changes in its intensity will cause the li-
ghting to switch on and off. The time of switching on the lighting
can be set by the user using the knob located inside the device.
Turning the knob towards the "moon" will switch the lighting on
later, turning the knob towards the "sun" will switch it on earlier.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F AZH-MINI-LED

  • Page 1 Purpose The AZH-MINI-LED is a twilight switch with a built-in light sensor, enclosed in a hermetically sealed housing and specially adapted to switch on the LED lighting. By using a switching element that...
  • Page 2 The twilight switch has a system that delays switching on and off of the lighting, thus reducing the impact of various interfe- rence (such as atmospheric discharges) on the operation of the machine. Mounting 1. Turn off the power supply. 2.
  • Page 3 Special care must be taken if the adjustment is made while the power is on. Be sure to use insulated scre- wdrivers and do not touch anything except the knob. - 3 -...
  • Page 4: Connection Diagram

    Connection diagram Technical data power supply 165÷265 V AC maximum load current (AC-1) 16 A switch-on threshold (adjustable) 2÷1000 lx hysteresis approx. 15 lx on delay approx. 10 s off delay approx. 20 s resistance to current shocks 120 A/20 ms power consumption 0.6 W terminal...
  • Page 5: Warranty

    Power table tungsten halogen fluorescent energy-saving 1500 W 1000 W 500 W 300 W 300 W The above data are indicative and will heavily depend on the design of a specific receiver (that is especially important for LED bulbs, energy-saving lamps, electronic transformers and pulse power supply units), switching frequency and operating conditions.