Download Print this page
F&F FW-WS1 Quick Start Manual

F&F FW-WS1 Quick Start Manual

Radio wall switch 2-button

Advertisement

Quick Links

FW-WS2
Radio wall switch
2-button
Do not dispose of this device to thrash with other unsorted waste! In accordan-
ce with the Waste Electrical and Electronic Equipment Act any household electro-wa-
ste can be turned in free of charge and in any quantity to a collection point established
for this purpose, as well as to the store in the event of purchasing new equipment (as
per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-
doned in the bosom of nature pose a threat to the environment and human health.
Description of the system
F&Wave is a family of wireless devices controlled by radio with a range of up to 100
meters*. The receivers are available in either a DIN-rail mounting version (housing 1S)
or a Ø60 flush-mounted version. The transmitters are available as handheld remo-
te controllers or as a flush-mounted version. The receivers relay control signals. The
device that receives a control signal from the transmitter will automatically send it
forward, which allows to increase the range of the remote control.
* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of
interference sources (power lines, transmitters, etc.) the actual range may be smaller.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, Poland
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -
Wireless system

Advertisement

loading

Summary of Contents for F&F FW-WS1

  • Page 1 F&F Filipowski sp. j. Wireless system Konstantynowska 79/81, 95-200 Pabianice, Poland phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: biuro@fif.com.pl FW-WS2 Radio wall switch 2-button Do not dispose of this device to thrash with other unsorted waste! In accordan- ce with the Waste Electrical and Electronic Equipment Act any household electro-wa- ste can be turned in free of charge and in any quantity to a collection point established for this purpose, as well as to the store in the event of purchasing new equipment (as...
  • Page 2 Characteristics 2-button remote control transmitter;   works with F&Wave remote control receivers;   ability to control any number of receivers;   on/off (bi-stable switch) with receivers: FW-R1P, FW-R1D, FW-R2P, FW-R2D,   FW-D1P, FW-D1D, FW-LED2P, FW-LED2D; raise/lower the roller blind with receivers FW-STR1P, FW-STR1D; ...
  • Page 3 Pairing After you successfully connect the receiver, press and hold the PROG button until the device switches on the output circuit and the communication LED goes off. Press the selected button. If the pairing is correct, the output circuit will be momentary switched off and the LED in the receiver will switch on again.
  • Page 4: Button Configuration

    Button configuration It is possible to change the configuration of the first S1 button to the ON function and to change the configuration of the second S3 button to the OFF function. To do this: Remove the frame by prying it gently with a flat tool in the cut dedicated to this purpose.
  • Page 5: Battery Change

    FW-STR1D wall buttons Dual-channel LED controller FW-LED2P FW-LED2D FW-WS1, FW-WS2, FW-WS3 Battery change Remove the frame by prying it gently with a flat tool in the cut dedicated to this purpose. Fold up the buttons. Remove the battery from the holder.
  • Page 6: Technical Data

    Technical data power supply 3 V DC power consumption button pressed 20 mA standby 15 nA battery CR2032 battery life approx. 15 hours of broadcasting (pressed button on the switch) working temperature 5÷50°C radio frequency 868 MHz dimensions 86×86×15 mm Warranty F&F products are covered by a 24 month warranty from the date of purchase.

This manual is also suitable for:

5908312599654