Download Print this page

Advertisement

Quick Links

EEI-4311
CABINET
Thank you for purchasing the MODWAY
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.
Owing to the size and weight of the Cabinet, we recommend that
padded area, in the room that it is intended for. Approximate assembly time: 70 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Hardware :
A)
B)
Cambolt/Metal
Ø 6 x 35 mm
x 34
Ø 15 mm
F)
G)
Dowel/Wood
x 2
Ø 8 x 50 mm
M 7 x 50 mm
K)
L)
Screw/Metal
x 12
M 3.5 x 13 mm
M 8 x 39 mm
P)
Q)
Screw/Metal
M 3.5 x 15.5 mm
x 20
M 6.4 x 45 mm
U)
V)
Handle/Plastic
x 2
Ø 8 x 20 mm
Customer Service 908-368-1025
CABINET !
C)
CamLock Big/Metal
CamLock Small/Metal
x 30
Ø 12 mm
H)
Hex/Allen Key/Metal
Screw/Metal
x 6
L 4
M)
Screw/Metal
x 16
R)
Screw/Metal
Anti-Deflection Bar/Metal
x 8
W)
Dowel/Wood
Floor Protector/Sponge/Felt
x 4
25 x 15 x 2 mm
www.modway.com
it is assembled by two adults, on a carpeted or
D)
Dowel/Wood
x 4
Ø 8 x 30 mm
I)
Rail/Metal
x 1
350 mm
N)
Hinge/Metal
Screw/Metal
x 4
M 4.5 x 12.5 mm
S)
Dowel/Wood
x 1
Ø 5 x 20 mm
X)
x 4
Screwdriver (Not Include)
E)
Dowel/Wood
x 44
Ø 6 x 30 mm
x 28
J)
Screw/Metal
x 2
M 6 x 10.5 mm
x 18
O)
Wedge/Plastic
x 24
x 20
9 x 14 x 10 mm
T)
Screw/Metal
x 4
M 6.4 x 25 mm
x 10
x 1
Page 1 of 17

Advertisement

loading
Need help?

Need help?

Do you have a question about the EEI-4311 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for modway EEI-4311

  • Page 1 EEI-4311 CABINET CABINET ! Thank you for purchasing the MODWAY Before you start, here are some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. Owing to the size and weight of the Cabinet, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
  • Page 2 EEI-4311 CABINET Components: 19 19 Top Board Bottom Board Side Board Left Side Board Right Assembly Leg Center Board Fixed Shelf Side Board Small Front Drawer Side Drawer Left Side Drawer Right Support Leg Bottom Drawer Back Drawer Frame Door Left...
  • Page 3 EEI-4311 CABINET STEP 1: Hardware required. X x1 Screwdriver not included STEP 2: Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 3 of 17...
  • Page 4 EEI-4311 CABINET STEP 3: Hardware required. Kx12 X x1 Screwdriver not included STEP 4: Hardware required. Customer Service 908-368-1025 www.modway.com Page 4 of 17...
  • Page 5 EEI-4311 CABINET STEP 5: Hardware required. X x1 Screwdriver not included Drawer runner/rail track assembly to side-board small and center-board STEP 6: Flip board ( 7 ) Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 5 of 17...
  • Page 6 & dowels assembly Hardware required. Nx16 Screwdriver not included X x1 Securing component ( 7 ) from step 6 to right side panel ( 4 ) STEP 8: Rear without edging Hardware required. Customer Service 908-368-1025 www.modway.com Page 6 of 17...
  • Page 7 EEI-4311 CABINET STEP 9: Ensuring shelf (6) inserted to center panel ( 5 ), with longer dowels go through and visible on the other side. Hardware required. F x2 X x1 Screwdriver not included STEP Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com...
  • Page 8 EEI-4311 CABINET STEP 11: Hardware required. X x1 Screwdriver not included STEP 12: Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 8 of 17...
  • Page 9 EEI-4311 CABINET STEP 13: Not Laminated Hardware required. Jx10 X x1 Screwdriver not included STEP 14: Hardware required. Customer Service 908-368-1025 www.modway.com Page 9 of 17...
  • Page 10 EEI-4311 CABINET STEP 15: Hardware required. X x1 Screwdriver not included STEP 16: Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 10 of 17...
  • Page 11 EEI-4311 CABINET STEP 17: Hardware required. X x1 Screwdriver not included STEP 18: Hardware required. Dx12 Customer Service 908-368-1025 www.modway.com Page 11 of 17...
  • Page 12 EEI-4311 CABINET STEP 19: Hardware required. X x1 Screwdriver not included STEP 20: Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 12 of 17...
  • Page 13 EEI-4311 CABINET STEP 21: Drawer with warning labels on top ATTENTION ADVERTENCIA WARNING Children have died from furniture tipover. Les enfants sont morts de basculement Los niños han muertopor vuelco de To reduce the risk of furniture tipover: dans les meubles. Réduire les risques de muebles.
  • Page 14 EEI-4311 CABINET STEP 23: STEP 24: Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 14 of 17...
  • Page 15 EEI-4311 CABINET STEP 25: STEP 26: Assembly large parts of hinges which were separated on step 7, to both door panels Hardware required. X x1 Screwdriver not included Customer Service 908-368-1025 www.modway.com Page 15 of 1...
  • Page 16 EEI-4311 CABINET Follow the step to clip on the hinges on STEP 27: doors to hinge on side panels. Click Continue to assembly handle ( 25 ). adjust door alignment when necessary. T x 6 Hardware required. STEP 28: Hardware required.
  • Page 17 EEI-4311 CABINET STEP 29: Assembly is complete. The CABINET is ready to enjoy now ! Customer Service 908-368-1025 www.modway.com Page 17 of 17...
  • Page 18: Installation Instructions

    4. Lace the end of the restraints strap through the larger hole in each brackret. Ensure the restraints strap with grids surface facing the inner loops. Bring both ends together and slide the flat end through the locking end and draw it through until all slack is removed. 5. Make sure that the strap is securely laced & locked. Customer Service 908-368-1025 www.modway.com...