modway EEI-4343 Quick Start Manual

Side table

EEI-4343 Side Table

Thank you for purchasing the MODWAY SIDE TABLE.

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2. Owing to the size and weight of the Side Table, we recommend that it is assembled by two adults, on a

carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

and environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten

the components from time to time, so please save the tools that have been provided.

6. Please keep all the pieces out of reach of children.

1. Table Body ×1

Customer Service 609-256-9000︱www.modway.com

2. Leg ×2

3. Batten ×2

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the EEI-4343 and is the answer not in the manual?

Page 1 EEI-4343 Side Table Thank you for purchasing the MODWAY SIDE TABLE. Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2. Owing to the size and weight of the Side Table, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-4343 Side Table STEP 1: Insert 2 pieces of Wooden Plug (A) into 1 piece of Leg (2) by hand as shown. Repeat the same step for the other piece of Leg (2). STEP 2 : 1.Attach 2 pieces of Legs (2) and 2 pieces of Battens (3) together as shown, insert 4 pieces of Bolts (B) Use Allen Wrench (C) to tighten Bolts (B) as shown .
Page 3 EEI-4343 Side Table STEP 3 : Attach assembled Legs (2) and (3) to the as shown, insert 4 pieces of Bolts (E) and Batten Table Body (1) Use Allen Wrench (D) to tighten Bolts (E) as shown STEP 4 : Carefully turn over the assembled Side Table.
Page 4 EEI-4343 Side Table STEP 5 : Take the plug out of the hole at the back of the side table and connect it to your home outlet STEP 6 : Open the top panel of the side table, the power sockets provides complex elements combined with easier installation.