Environmental Conditions; Qualified Personnel; Safety Measures At The Installation Location; Noise Emission Values - Fronius Tauro 50-3 Operating Instructions Manual

Environmental Operation or storage of the device outside the stipulated area will be deemed as not in
conditions accordance with the intended purpose. The manufacturer accepts no liability for any
damage resulting from improper use.
Qualified person- The servicing information contained in these operating instructions is intended only for
nel the use of qualified service engineers. An electric shock can be fatal. Do not carry out
any actions other than those described in the documentation. This also applies to quali-
fied personnel.
All cables and leads must be secured, undamaged, insulated and adequately dimen-
sioned. Loose connections, scorched, damaged or inadequately dimensioned cables and
leads must be immediately repaired by authorised personnel.
Maintenance and repair work must only be carried out by an authorised specialist.
It is impossible to guarantee that bought-in parts are designed and manufactured to meet
the demands made on them, or that they satisfy safety requirements. Use only original
spare parts (also applies to standard parts).
Do not carry out any alterations, installations, or modifications to the device without first
obtaining the manufacturer's permission.
Components that are not in perfect condition must be changed immediately.
Safety measures When installing devices with openings for cooling air, ensure that the cooling air can
at the installation enter and exit unhindered through the air ducts. Only operate the charger in accordance
location with the degree of protection shown on the rating plate.
Noise emission The maximum sound power level of the inverter is specified in the Technical Data.
values
The device is cooled as quietly as possible with the aid of an electronic temperature con-
trol system; this depends on the amount of converted power, the ambient temperature,
the level of soiling of the device, etc.
It is not possible to provide a workplace-related emission value for this device because
the actual sound pressure level is heavily influenced by the installation situation, the
power quality, the surrounding walls and the properties of the room in general.

EMC measures

In certain cases, even though a device complies with the standard limit values for emis-
sions, it may affect the application area for which it was designed (e.g. when there is
sensitive equipment at the same location, or if the site where the device is installed is
close to either radio or television receivers). If this is the case, then the operator is
obliged to take appropriate action to rectify the situation.

Data protection

The user is responsible for the safekeeping of any changes made to the factory settings.
The manufacturer accepts no liability for any deleted personal settings.

Copyright

Copyright of these operating instructions remains with the manufacturer.
7