Assembly; Installation - Husqvarna G1300P Operator's Manual

Introduction
WARNING:
safety chapter before you assemble the
product.
To assemble the accessory kit
(G5500P, G8500P)
1. Learn the parts of the accessory kit.
B
A
G
X2
H X2
I X4
Introduction
WARNING:
safety chapter before you install the product.
To ground the product
WARNING:
grounded by a person with good experience
and knowledge in the field of electricity. In
some areas an approved electrician must do
the installation. Obey local regulations.
8

Assembly

Read and understand the
C
D
E
F
J X2
M X2
K X2
N X2
L X2

Installation

Read and understand the
The product must be
2. Assemble the accessory kit. Refer to the illustrations.
a) Wheel assembly:
A
H
I
b) Handle assembly:
L
D
E
1. Install a ground rod at a minimum of 24 in. into the
ground.
WARNING:
be made of brass or copper.
2
2. Connect a 2.5 mm
terminal on the control panel to a ground rod.
Note:
The ground wire and the ground rod are not
supplied with the product.
G
I
J
K
C
B
N
F
M
The ground rod must
ground wire from the ground
1420 - 003 - 09.07.2020