General Information; Introduction; Type Plate - nilan VGU 180 EK RS User Manual

General information

Introduction

ATTENTION
The unit must be started up immediately after installation and connection to the duct system.
When a ventilation unit is not in operation, humidity from the rooms may penetrate into the
ducts and create condensation. Condensate water may leak out of the valves and damage
furniture and floors. Condensation may also form inside the unit, which can damage its
electronics and fans.
The unit is delivered fully tested and ready for operation.

Type plate

Nilan's type plate can be found on the unit
4
Note: Contact Nilan a/s with questions about the product, it is
important to have the unit name and serial No. (SN) ready. On
the basis of this information, please contact service
department find all informations about the relevant
aggregate and thus provide information and answer
questions about what the aggregate consists of/contains, as
well as the software used.