Emerson GDU-Incus Reference Manual page 17

Reference Manual
00809-0100-3003
2.5.3 Mount DNV certified detector
When an installation requires equipment to be DNV certified, you must mount the
detector using a DNV mounting bracket.
Figure 2-6: DNV Mounting Diagram
A. Roof
B. Detector permanently locked in vertical position by 4X M10 bolts (one either side and
C. Floor
D. See
E. See
F. See
G. DNV mounting bracket: GDU-02-412
Figure 2-6
45 Nm and use spring washers in all cases.
Reference Manual
two on underside of bracket)
Step 3.
Step 2.
Step 1.
shows the mounting arrangement for DNV installation. Torque all bolts to
Installation
December 2020
17