Table of Contents
Advertisement
Installation
December 2020
Figure 2-2: Three-Dimensional View of Detector Coverage.
The detector uses four independent sensor heads for full coverage.
three-dimensional view of the coverage (detector not to scale) at a 10 ft. (3 m) height
above floor level with the detector pointing vertically downwards. The detector coverage
is specified as meters radius at the floor level, as this is the minimum sensing distance. As
shown, the entire area below the detector is covered, as well as some of the area above
and around the detector. Each sensor overlaps the next, so multiple sensors cover areas
underneath the detector.
12
Reference Manual
00809-0100-3003
Figure 2-2
shows a
GDU-Incus
Advertisement
Table of Contents
