Standby Mode (Only Battery Version); Retrieving Settings; Retrieving The Activation Status (F2); Retrieving The Flush Duration Per Flush (F1)/ Flush Packages Per Hygiene Flush (F3)/Interval Time (F4) - DURAVIT DuraSystem WD6002 000 000 Operating Instructions Manual

6.2 Standby mode (only battery version)

In order to increase the service level of the battery, the battery version of the hygiene
flush has a standby mode to which the system switches 10 sec. after the membrane
keypad is last used.
> Press the "+" button.
The membrane keypad is activated. The status LED flashes and shows the current
battery level.
LED flashes 5 times: Battery is sufficiently charged
LED flashes twice: Battery must be replaced

6.3 Retrieving settings

Retrieving the activation status (F2)

You can retrieve the activation status (F2) of the hygiene flush (see table 1: Hygiene
flush).
> Press the F2 button once to retrieve the activation status.
The status LED flashes and shows the current activation status.
LED flashes once: Hygiene flush is deactivated.
LED flashes twice: Hygiene flush is activated.
Retrieving the flush duration per flush (F1)/flush packages per hygiene flush (F3)/
interval time (F4)
You can retrieve the set flush duration per flush (F1), the number of flush packages
per hygiene flush (F3) and the interval time (F4) (see table 1: Hygiene flush).
> Press the F1 button once to retrieve the flushing duration per flush.
The status LED flashes on the membrane keypad according to the steps that are set.
> Press the F3 button once to retrieve the flush packages per hygiene flush.
The status LED flashes on the membrane keypad according to the steps that are set.
> Press the F4 button once to retrieve the interval time.
The status LED flashes on the membrane keypad according to the steps that are set.
If the status LED flashes 5 times after pressing the F1 button (flush duration per
flush), the flush duration is set to approx. 5 sec. per flush. If the status LED flashes 5
times after pressing the F3 button (flush packages per hygiene flush), the flush occurs
5 times per hygiene flush. If the status LED flashes 5 times after pressing the F4 but-
ton (interval time), the interval time is set to 120 h.
26