Operation; Removing/Fixing The Actuator Plate; Removing The Actuator Plate; Fixing The Actuator Plate - DURAVIT DuraSystem WD6002 000 000 Operating Instructions Manual

6. Operation

You can retrieve and adjust the hygiene flush settings on the service opening plate via
the membrane keypad (see 1.1 Hygiene flush membrane keypad). You must remove
the actuator plate to make the settings via the membrane keypad (see 6.1 Removing
the actuator plate).

6.1 Removing/fixing the actuator plate

1
4

Removing the actuator plate

2 > Press the actuator plate upwards.
> Release the plate from above.
> Release the plate from below.
3

Fixing the actuator plate

> Position the actuator plate at the bottom.
3
> Slide the plate upwards and push it firmly
> Slide the plate downwards against the
2
1
against the wall.
wall until it engages.
25