Table of Contents
Advertisement
RAIDUTIL
a
Start the system in DOS mode.
b
Go to the folder having the RAIDUTIL program
c
Enter the following command: RAIDUTIL -F
3
Remove the jumper you installed in
4
Restart the system from the SMOR start floppy disk. If the
system restarts normally, the controller can now be configured
using SMOR or Storage Manager.
5
Use SMOR.exe to flash the controller BIOS and SMOR images.
If the system fails to restart, call Adaptec Technical Support.
Controller Reset Procedures
Step
1.
C-3
Advertisement
Table of Contents
