Using The Ccu - Adaptec RAID 1210SA User Manual

Using the CCU

To access the Controller Configuration Utility (CCU):
1 Turn on your computer and press Ctrl+A when prompted to
access the ARC utility.
2 If multiple controllers are installed, select the controller you
want to configure and press Enter.
3 From the ARC menu, select SATASelect.
The Controller Configuration and SATA Configuration menu
options are displayed.
4 Select Controller Configuration.
You can modify the following Controller Interface options:
Runtime BIOS—Enables or disables the controller's
runtime BIOS. The BIOS must be enabled if you want to boot
from the controller.
If Runtime BIOS is enabled and the Array-based BBS
Support option is disabled, the controller BIOS is enabled
and will post the first array (or drive) attached to the
controller as a bootable hard disk drive.
The default is Enabled.
Array-Based BBS Support—If Runtime BIOS, and this
option are enabled, all devices (array or drives) on each
controller in the system are posted as BBS devices.
In a BBS-enabled system, if array-based BBS support is
enabled, the Hard Drive Boot order menu includes entries
for all arrays (or drives) connected to the installed RAID
controllers.
The default is Enabled.
Physical Drives Display during POST— The default is
Disabled.
BIOS Utilities
A-8