Table of Contents
Advertisement
Enabling and Configuring the Notifier Service
Before you begin to configure e-mail notification you need to have
the following information available:
The SMTP mail server host name or IP address.
The port that SMTP mail server is configured to use. The default
is 25, which is the default for most SMTP mail server packages.
If you are unsure of the default for you server, ask your e-mail
administrator.
The SMTP e-mail address to which all returned e-mail should
be forwarded. SMTP e-mail addresses take the form
myname@companyname.com
The SMTP e-mail address of all users that need to receive event
notifications.
Configuring Event Notification
To configure event notification:
1 Use the System Log pull-down to select the level of events to be
added to the system event log.
2 Use the Popup Alerts pull-down to select the level of events
that trigger a popup message. Or, select the Sound On box to be
notified by a system sound.
To configure e-mail event notification:
3 In SMTP Server type the address of SMTP mail server host
name or IP address.
4 In port # type the port number that the SMTP mail server is
configured to use.
5 In Bounce Mail type the e-mail address where all returned
e-mail should be sent.
6 Type in the e-mail address of a user you want to receive
notifications. Select the level of events you want that user to
receive. If you wish to add more users, repeat the steps above.
Note: If you need to notify more than the three allocated users,
Adaptec recommends that you create an e-mail group address
to be notified.
Using Adaptec Storage Manager – Browser Edition
.
5-18
Advertisement
Table of Contents
