Table of Contents
Advertisement
Using SATASelect
The SATASelect utility enables you to change device and controller
settings without opening the system chassis or handling the card.
Starting and Exiting SATASelect
To start SATASelect:
1 Turn on your computer and press Ctrl+A when prompted to
access the ARC utility.
2 If multiple controllers are installed, select the controller you
want to configure and press Enter.
3 From the ARC menu, select SATASelect.
The Controller Configuration and SATA Configuration menu
options are displayed.
To exit SATASelect, press Esc until a message prompts you to exit.
(If you changed any settings, you are prompted to save the changes
before you exit.) Choose Yes to exit and reboot the system. Any
changes you made take effect after the system boots.
Using the SATASelect Menus
To select a SATASelect menu option, use the arrow keys to move the
cursor and press Enter.
BIOS Utilities
A-7
Advertisement
Table of Contents
