Place Main Fuse; Connect The Gx Device - Victron energy Lynx Shunt VE.Can Manual

Lynx Shunt VE.Can
Alarm relay
connenctor
Alarm relay connection Lynx Shunt VE.Can

6.2.4. Place main fuse

Place the main fuse in the Lynx Shunt VE.can.
Be aware that if the positive bus is already powered, the moment the fuse is placed the system will become live.
Placing the CNN fuse in the Lynx Shunt VE.Can

6.2.5. Connect the GX device

Connect the Lynx Shunt VE.Can VE.Can port to the GX device VE.Can port using a RJ45 cable.
Multiple VE.Can devices can be interconnected, but make sure that the first and the last VE.Can device both have a VE.Can
RJ45 terminator installed.
Power the GX device from the output of the Lynx Shunt VE.Can or a Lynx distributor connected to the output of the Lynx Shunt
VE.Can.
Page 13 Installation