Advertisement
Auto Channel Function Added
Now you can use the Auto Channel function.
Incoming MIDI messages are sent to the track selected by the TRACK
SEL [1]–[4] buttons.
This is convenient when a MIDI keyboard etc. is connected.
The following item is added to the system settings (MIDI tab).
Parameter
Value
MIDI Rx Auto
OFF, CH1, CH2,
Channel
CH3...CH16
Added Shortcuts
Action
Operation
Duplicating a
In tone or drum track, hold down the [SEQ] button and press the
Measure
MEASURE [>] button.
Copy selected step
In the NOTE EDIT screen of tone track, hold down the [SHIFT] button
and press the [FX] button to copy.
Paste to selected
step
Repeat to paste.
Enter a SubStep in
In drum track, hold down the [SEQ] button and press a pad [1]–[16].
the drum track
Switching KnobTrk
Press the [SOUND], [FILTER], [FX], and [MOD] buttons simultaneously.
setting
Problems Fixed
5
We improved the number of voices used when using samples in a drum
track.
5
We fixed the problem that had caused hangups when the [FX PRM] knob
and [FX DEPTH] knob were operated while switching MFX in TOTAL MFX.
5
We fixed the problem that had caused the MFX parameter assigned to
the knob to not change correctly when using the [VALUE] dial to change
the MFX Type.
5
We fixed the problem that had caused freezing when a damaged WAV file
was imported.
5
We fixed the problem that caused the unit to freeze when exiting storage
mode.
5
We fixed the problem that user samples were read 1 sample shorter after
imported.
Explanation
If there is input on the specified MIDI channel,
those MIDI messages are sent to the track
selected by the TRACK SEL [1]–[4] buttons.
MC-101 Update
8
– Functions Added in Ver.1.30
Advertisement
