Advertisement
MIDI Input/Output Functions Added
Knob operations, switching clips, switches scenes, MIDI output
The following items are added to the system settings (MIDI tab).
Parameter
Value
CH1, CH2, CH3...
Control Channel
CH16
Control Tx OUT
OFF, ON
Control Tx USB
OFF, ON
Control Rx
OFF, ON
The following items are added to the track settings (MIDI tab).
Parameter
Value
Tx Note
OFF, ON
Tx CC
OFF, ON
Tx PC
OFF, ON
Added Shortcuts
Operation
Operation
Temporarily set the
Hold down the TRACK SEL [1]–[4] buttons of a tone/drum track, and
sequencer playback
press the MEASURE [>] button.
mode to random
Temporarily set the
Hold down the TRACK SEL [1]–[4] buttons of a tone/drum track, and
sequencer playback
press the MEASURE [<] button.
mode to reverse
Use the metronome Hold down the [TEMPO] button and press the [EXIT] button.
Added Metronome Function
You can now use a metronome function.
The metronome operates and sounds in synchronization with the
master clock.
The following parameter is added to the TEMPO screen.
Parameter
Value
METRONOME
ON, OFF
Explanation
Specifies the MIDI channel that switches scenes.
Specifies whether scene changes are output to
MIDI OUT.
Specifies whether scene changes are output to
USB MIDI.
Specifies whether scene changes are received
from an external device.
Explanation
Specifies whether the notes of each track are
output.
* This is not shown for a looper track.
Specifies whether knob operations of each
track are output.
Specifies whether clip changes of each track are
output.
Explanation
Specifies whether the metronome is used (ON)
or not used (OFF).
* You can also switch this on/off by holding down the
[TEMPO] button and pressing the [EXIT] button.
MC-101 Update
Problems Fixed
5
We fixed the problem that had occasionally caused brief silence when
operating Scatter.
5
We fixed the problem that had caused user sample settings to be
initialized when importing a WAV into the looper.
5
We fixed the problem that had caused playback to be an incorrect pitch
when a WAV file of a sample rate other than 44.1 kHz was loaded into a
drum track instrument.
* If a project created in Ver.1.02 or earlier is loaded, the playback pitch
will be different if a sample rate other than 44.1 kHz is used in the
drum track.
5
We fixed the problem in which the clip name was not correctly reflected
when a WAV file was loaded into a clip.
5
We fixed the problem in which freezing occurred when the 200th or later
file was selected in the project select screen or the WAV FILE select screen.
5
Other minor problems have been fixed.
10
– Functions Added in Ver.1.20
Advertisement
