Advertisement
Functions Added in Ver.1.30
Clip Chain Function Added
The clip chain function lets you play back a specified clip at the desired
timing.
You can use the clip chain function to create a song that plays back
clips in succession, or use it to specify a fill-in.
The following settings are added to the CLIP SETTING screen.
Parameter
Value
Specifies the clip that plays next, and how it operates.
STAY
NEXT CLIP
STOP
CLIP 1–16
Specifies the timing of the next operation.
OFF
LENGTH
1–512
* You can make settings from the MEASURE EDIT screen in the same way.
Added Functions for [C1]–[C4] Knobs
The following item is added to the system settings (CTRL tab).
Parameter
Explanation
SINGLE:
Use the [C1]–[C4] knobs to control the SOUND, FILTER, MOD,
and FX parameters of one track.
KnobTrk
MULTI:
Use the [C1]–[C4] knobs to control the parameters of the four
tracks selected by the [SOUND], [FILTER], [MOD], and [FX] buttons.
Added Functions for CLIP MODE
You can now edit clips other than the one being played.
The display of CLIP MODE has been changed.
Displays the clip currently playing.
While the unit is stopped, "STOP" is
displayed.
Displays the clip currently being edited.
When switching clips to play, "NEXT" is
displayed.
Action
Operation
Change the clip to
Press the pad [1]–[16].
play or edit.
Hold down the [SHIFT] button and press the pad [1]–[16].
Change the clip to
edit.
Turn the [VALUE] dial.
Hold down the [SHIFT] and the [PROJECT] button and then press the
Delete the Clip.
pad [1]–[16].
Explanation
Plays the same clip as currently.
Stops clip playback.
Plays the specified clip.
The next operation occurs when the clip plays
to the end.
Specifies the timing of the next operation in
units of steps.
MC-101 Update
SMF Import Function Added
An SMF (Standard MIDI File) saved on an SD card can be imported into
a clip.
* SMF that you want to load must be placed in the ROLAND/
GROOVEBOX/MIDI folder of the SD card.
1.
Set PAD MODE to CLIP, and select the empty clip into which
you want to load the SMF (Standard MIDI File).
2.
Press the
[VALUE]
dial.
The CREATE screen appears.
3.
Select LOAD MIDI.
4.
Select MIDI FILE.
The MIDI/SMF file browser appears.
Controller
Explanation
If a folder level is selected:
[VALUE] dial
If a file is selected:
If a folder level other than root is selected:
higher folder level.
[EXIT] button
If the root folder is selected:
MEMO
"F:"
shown at the beginning indicates a folder.
NOTE
All tracks included in the SMF are overwritten onto one clip.
5.
Press the
[ENTER] button
MIDI Input/Output Functions Added
How you can specify the numbers of the CC (control change) messages
that are transmitted by the [FILTER] knob, [MOD] knob, and [FX] knob.
The following items are added to the track settings (MIDI tab).
Parameter
Value
Tx FILTER CC
CC0, CC1, CC2...
Number
CC119
CC0, CC1, CC2...
Tx MOD CC Number
CC119
CC0, CC1, CC2...
Tx FX CC Number
CC119
7
– Functions Added in Ver.1.30
Moves to the next lower folder level.
Loads the sample.
Moves to the next
Exits the SMF browser.
to load.
Explanation
Specifies the CC number transmitted by the
[FILTER] knob.
Specifies the CC number transmitted by the
[MOD] knob.
Specifies the CC number transmitted by the [FX]
knob.
Advertisement
