Advertisement
Functions Added to the Total Effect
Compressor
Gain reduction meter display added for each band
Release Sync added to each band
(sets the release time following the tempo)
The following items were added to the TOTAL EFFECTS EDIT screen
(COMP tab).
Parameter
Value
OFF, 1/16, 1/8T, 1/16.,
High Release Sync
1/8, 1/4T, 1/8., 1/4
OFF, 1/16, 1/8T, 1/16.,
Mid Release Sync
1/8, 1/4T, 1/8., 1/4
OFF, 1/16, 1/8T, 1/16.,
Low Release Sync
1/8, 1/4T, 1/8., 1/4
Explanation
Sets the release time following the
tempo.
Sets the release time following the
tempo.
Sets the release time following the
tempo.
MC-101 Update
Added Shortcuts
Action
Operation
In SEQ mode on the drum track, press the [STEP] button while
Input a tie
holding down the [EXIT] button.
Problems and Functions Corrected
5
The time required to save a project has been reduced.
5
The issue with being unable to control scenes 9–128 by receiving
program change messages was fixed.
5
The issue with clips being selected when a pad is muted was fixed.
5
The issue with preview being unavailable in the sound browser was fixed.
5
The issue with the sound not being applied immediately when a sound
file is imported was fixed.
5
The issue with irrelevant data (such as clip names) being copied when a
tone is copied was fixed.
5
Other textual errors were fixed.
5
The issue with the target of the clip to edit being incorrect was fixed.
5
The issue with the [OCT+], [OCT-] and [TIE/REST] buttons not working in
CHORD mode when the scale in NOTE mode was set to a value other than
"Chromatic" was fixed.
5
When editing steps in CHORD mode, a pad now lights up red if the pad's
note and the note for the selected step is the same.
3
– Functions Added in Ver.1.60
Advertisement
